HYDRAULIC PRESS

Target Wheel And Plug Press SPM

• Three Station Linear Indexing Machines
• Load Job Press Two Hand Push Button
• Bar Code Reader Read the Code on the Job & The same is Stored in the Scada
• Take out the Job & Load in the Fixture & Load Target Wheel & Plug on the Holders
• Press Cycle Start Button
• Camera Confirms the Presence of Seals
• If Seals are Present the Plug is Pressed at 1st Station
• Then on the 2nd Station Target Wheel is Pressed
• On 3rd Station Depth of Target Wheel & Plug is Checked
• During Pressing Load V/S Distance Graph is Plotted & All the Data’s are Stored
  in the PC

Taper Pin Hydraulic Press

• Manual loading of job
• Manual loading of child parts
• Cycle start with two hand push buttons
• Provisions made to keep tool kit, operational manual, work instructions, etc
• Press capacity: 5 Tons

Oil Filter Press and Caulking

• Manual loading of job
• Manual loading of child parts
• Cycle start with two hand push buttons
• Provisions made to keep tool kit, operational manual, work instructions, etc.
• Safety Curtains (Area Sensors) provided for operator safety
• Single machine equipped with two station, with two load cell for monitoring   pressing load
• Press Capacity: 2 Tons for each station